The M-Tronic system allows you to monitor the work and the machine during its use and interact in real time with the settings of the machine parameters, manuals, emergency alerts and much more. Click on the M-Tronic logo to access the M-TRONIC interface web page, where you must enter the credentials provided by Marini QG to access your account and connect to the purchased system.
Home / Civil Engineering / Drilling / MR Line

MR Line

Pneumatic/hydraulic light drilling unit made for rope access drilling works, slopes consolidation, anchors, soil nails, rock protection.
Machines
MR – 1
The MR - 1 pneumatic drilling unit is the ideal machine on extremely sloping and irregular work surfaces. Can be equipped with light (30 kg) roto-percussion drifter
Retract Force 600 daN
Max.Clamp Passage -
Weight 190 Kg
Retract Force 1322 lbf
Max.Clamp Passage -
Weight 418 lbs
Continue
MR – 2 PN
The MR - 2 PN pneumatic drilling unit is used on very inclined work surfaces. Can be equipped with a rotary head or a separate roto-percussion drifter.
Retract Force 950 - 1250 daN
Max.Clamp Passage -
Weight 300 - 370 Kg
Retract Force 2136 - 2810 lbf
Max.Clamp Passage -
Weight 661 - 815 lbs
Continue
MR – 2 ID
The MR - 2 ID Hydraulic drilling unit complete of power pack, is used on very inclined work surfaces. Can be equipped with a rotary head or a separate roto-percussion drifter.
Power Pack Engine 15 - 17 - 22 Kw
Retract Force 1000 - 1500 daN
Max.Clamp Passage 115 - 188 mm
Weight 380 - 650 Kg
Power Pack Engine 20 - 23 - 30 Hp
Retract Force 2248 - 3372 lbf
Max.Clamp Passage 4.5 - 7.4 in
Weight 837 - 1433 lbs
Continue
MR – 3
The MR - 3 hydraulic drilling unit, which is equipped with hydraulic power pack, is patented for drilling on linear work surfaces. Born primarily for the coring sector, it is however also suitable for rotary head and separate roto-percussion drifter.
Power Pack Engine 15 - 17 - 22 Kw
Retract Force 1000 - 1500 daN
Max.Clamp Passage 115 - 188 mm
Weight 450 - 650 Kg
Power Pack Engine 20 - 23 - 30 Hp
Retract Force 2248 - 3372 lbf
Max.Clamp Passage 4.5 - 7.4 in
Weight 992 - 1433 lbs
Continue
MR – 4
The MR - 4 hydraulic drilling unit complete of power pack, is used on inclined work surfaces. Can be equipped with rotary head or separate roto-percussion drifter
Motore Centrale Idraulica 15 - 17 - 22 Kw
Forza di tiro 1000 - 1500 daN
Max.Passaggio Morse 115 - 188 mm
Peso 700 - 900 + 250 Kg
Power Pack Engine 20 - 23 - 30 Hp
Retract Force 2248 - 3372 lbf
Max.Clamp Passage 4.5 - 7.4 in
Weight 1543 - 1984 + 551 lbs
Continue
MR – 5 PN
The MR - 5 PN pneumatic drilling unit, which is equipped with hydraulic power pack, is patented for drilling on linear or slightly inclined work surfaces. Can be equipped with rotary head and separate roto-percussion drifter.
Retract Force 950 - 1250 daN
Max.Clamp Passage -
Weight 350 - 450 Kg
Retract Force 2136 - 2810 lbf
Max.Clamp Passage
Weight 771 - 992 lbs
Continue
MR – 5 ID
The MR - 5 ID hydraulic drilling unit, which is equipped with hydraulic power pack, is patented for drilling on linear work surfaces. Can be equipped with rotary head and separate roto-percussion drifter
Power Pack Engine 15 - 17 - 22 Kw
Retract Force 1000 - 1500 daN
Max.Clamp Passage 115 - 188 mm
Weight 700 - 1000 Kg
Power Pack Engine 20 - 23 - 30 Hp
Retract Force 2248 - 3372 lbf
Max.Clamp Passage 4.5 - 7.4 in
Weight 1543 - 2204 lbs
Continue
Rock-drill
MA 90
Light pneumatic drifter with roto-percussion unit. Shank for drill steel 22x108 / 25x105 mm
Feeding Pneumatic
Impact Energy 180 Nm
Shanks 22x108 – 25x108mm
Weight 30 Kg
Feeding Pneumatic
Impact Energy 133 ft lbf
Shanks 7/8”x 4¼” or 1” x 4¼”
Weight 66 lb
Continue
MA 100
Hydro-Pneumatic drifter with separete roto-percussion unit. Available shanks for rods R25-R32-R38-R51 - ISCHEBEK TITAN 30-40-52
Feeding Pneumatic / Pneumatic-Hydraulic
Impact Energy 180 Nm
Rotation Torque 30(pneumatic) 100(hydraulic) daNm
Shanks R25/R32/R38/R51 ISCHEBECK TITAN 30/40/52
Weight 56 Kg
Feeding Pneumatic / Pneumatic-Hydraulic
Impact Energy 133 ft lbf
Rotation Torque 221(pneumatic) / 737(hydraulic) lbft
Shanks R25/R32/R38/R51 ISCHEBECK TITAN 30/40/52
Weight 128 lb
Continue
MA 100 ID
Hydraulic drifter with separete roto-percussion unit. Available shanks for rods R25-R32-R38-R51 - ISCHEBEK TITAN 30-40-52
Feeding Hydraulic
Impact Energy 150 Nm
Rotation Torque 100 daNm
Shanks R25/R32/R38/R51 ISCHEBECK TITAN 30/40/52
Weight 72 Kg
Feeding Hydraulic
Impact Energy 110 ft lbf
Rotation Torque 737 lbft
Shanks R25/R32/R38/R51 ISCHEBECK TITAN 30/40/52
Weight 158 lb
Continue
Rotating heads
EP 95
Pneumatic rotary head for the use of small down the hole hammers. Shaft out unit with API 2 "3/8 F or RD 50 M thread
Feeding Pneumatic
Rotation Torque 80 daNm
Shaft out API 2” 3/8” F - RD50 M
Weight 35 Kg
Feeding Pneumatic
Rotation Torque 590 lbf
Shaft out API 2” 3/8” F - RD50 M
Weight 77 lb
Continue
EP 120
Pneumatic rotary head for the use of small down the hole hammers. Shaft out unit with API 2"3/8 F thread
Feeding Pneumatic
Rotation Torque 120 daNm
Shaft out API 2” 3/8” F
Weight 46 Kg
Feeding Pneumatic
Rotation Torque 885 lbft
Shaft out API 2” 3/8” F
Weight 101 lb
Continue
Continue
ID 160
Hydraulic rotary head for the use of small down the hole hammers. Shaft out unit with API 2 "3/8 F or RD 50 M thread
Feeding Hydraulic
Rotation Torque 160 daNm
Shaft out API 2” 3/8” F - RD50 M
Weight 35 Kg
Feeding Hydraulic
Rotation Torque 1180 lbft
Shaft out API 2” 3/8” F - RD50 M
Weight 77 lb
Continue
ID 300
Hydraulic rotary head for the use of small down the hole hammers, casings and augers. Shaft out unit with API 2 "3/8 F thread
Feeding Idraulica
Rotation Torque 350 daNm
Shaft out API 2” 3/8” F
Weight 65 Kg
Feeding Hydraulic
Rotation Torque 2581 lbft
Shaft out API 2” 3/8” F
Weight 143 lb
Continue
ID 500
The ID500 rotation head is ideal for drilling with DTH hammers up to 6 ", for holes from 70 mm up to 251mm in diameter
Feeding Hydraulic
Rotation Torque 500/250 daNm
Shaft out API 2” 3/8” F
Weight 90 Kg
Feeding Hydraulic
Rotation Torque 3688 /1844 lbft
Shaft out API 2” 3/8” F
Weight 198 lb
Continue
ID CD
Hydraulic head suitable for subsoil exploration by small diameter cores. Shaft out unit with 1 "1/4" W M thread
Feeding Hydraulic
Rotation Torque 3.5 daNm
Rotation Speed 1300 rpm
Shaft out 1” 1/4” W M
Weight 22 Kg
Feeding Hydraulic
Rotation Torque 25.82 lbft
Rotation Speed 1300 rpm
Shaft out 1” 1/4” W M
Weight 48.50 lb
Continue
ID CD Special
Hydraulic head suitable for subsoil exploration by medium diameter cores. Shaft out unit with API 2" 3/8 F thread
Feeding Hydraulic
Rotation Torque 26 daNm
Rotation Speed 600 rpm
Shaft out API 2” 3/8” F
Weight 30 Kg
Feeding Hydraulic
Rotation Torque 191.8 lbft
Rotation Speed 600 rpm
Shaft out API 2” 3/8” F
Weight 66.13 lb
Continue
MR-A Line
Hydraulic and pneumatic drilling mast attachments suitable for the installation on excavators, spider excavators and tele-handlers.
Discover the line
MR-C Line
Crawler drilling rigs suitable to various specialized mico-drilling operations in civil engineering and foundation.
Discover the line
MR-S line
Pneumatic/hydraulic light drilling slides designed to be installed on various frames such as scaffoldings, self-moving equipment.
Discover the line
Top Hammers
Wide range of pneumatic / hydraulic top hammers with separated rotation suitable for Marini machines
Discover the line
Rotary heads
Wide range of pneumatic / hydraulic rotary heads suitable for Marini machines
Discover the line
Accessories
Wide range of accessories and tools for all Marini machines.
Discover the line
Contact us